by Aquarium Pharmaceuticals, API, MARS Fishcare
Buy new: $9.99
4 used & new from $6.29
(Visit the Best Sellers in Test Kits list for authoritative information on this product's current rank.)
Tests for nitrite in freshwater & saltwater aquariums. Toxic nitrite is produced by nitrifying bacteria in the biological filter as it breaks down ammonia. This kit tests for harmful nitrite and measures levels from 0 to 5.0 ppm. 180 tests per kit.Freshwater/Saltwater Nitrite Test Instructions:Why Test For Nitrite?Nitrite (NO2-) is produced in the aquarium by the biological filter. Beneficial bacteria in the biological filter convert toxic ammonia into nitrite (also toxic). The biological filter then converts nitrite into nitrate (NO3-). Testing for the presence of toxic nitrite is essential, so that once detected, steps can be taken to remove it. Otherwise, nitrite in the aquarium will prevent fish from carrying on normal respiration. High levels of nitrite quickly lead to fish death. Even trace amounts of nitrite stress fish, suppressing their immune system and, thereby, increase the likelihood of disease and subsequent fish loss.Testing Tips:This test kit reads total nitrite (NO2-) level in parts per million (ppm) which are equivalent to milligrams per Liter (mg/L) from 0 ppm to 5.0 ppm, in either fresh or saltwater aquariums. Other nitrite test kits that measure ?nitrite-nitrogen? (NO2-N) will give readings 3.3 times LESS than this test kit.Directions for Testing Nitrite: Read thoroughly before testing. Do not allow test solutions to get into aquarium. To remove childproof safety cap: With one hand, push red tab left with thumb while unscrewing cap with free hand. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube). Add 5 drops of Nitrite Test Solution, holding dropper bottle upside down in a completely vertical position to assure uniformity of drops added to the water sample. Cap the test tube and shake the tube for 5 seconds. Do not hold finger over the open end of the tube, as this may affect test results. Wait five minutes for the color to develop. Read the test results by matching the color of the solution against those on the
No comments:
Post a Comment